Vapeasy Luca Creations 4C Tank MTL RTA Clone

Discussion in 'General Vendor Discussion' started by Gina, Nov 5, 2021.

  1. Gina

    Gina Guru

    Joined:
    May 31, 2016
    Messages:
    5,115
    Likes Received:
    0
    [​IMG]

    The Vapeasy Luca Creations 4C Tank MTL RTA Clone Rebuildable Tank Atomizer is made from 316 stainless steel in 22mm diameter and PEI tank tube holds 3ml capacity.

    The 4C Tank Clone MTL RTA is with bottom airflow (1mm / 1,2mm / 1,7mm).

    The Vapeasy Luca Creations 4C Tank clone is equipped with adjustment of the pull and flow of the liquid, the screw top cap allows you to easily refill and close, avoiding leaks. Before refilling or topping up, the liquid flow must be completely closed by turning the whole tank, in order to avoid flooding and / or leaks. Once refilled, before opening the liquid flow make sure that the top cap is closed.

    Features:
    510 threading coonection
    22mm diameter
    3ml capacity
    Easy to build
    The air flow adjustment ring has 3 holes: 1mm / 1,2mm / 1,7mm
    A small, low and flat chamber
    Liquid control
    Delrin Drip Tip (4.3mm hole)
    Ultem tank
    Material: 316L stainless steel

    More details for the Vapeasy 4C Tank Clone, please check >> https://www.3fvape.com/53503-vapeasy-luca-creation-4c-tank-style-mtl-rta.html
     
  2. Gina

    Gina Guru

    Joined:
    May 31, 2016
    Messages:
    5,115
    Likes Received:
    0

Share This Page