Pioneer4you iPV V200 200W Dual 18650 Box Mod YiHi SX531

Discussion in 'General Vendor Discussion' started by Gina, Oct 14, 2021.

  1. Gina

    Gina Guru

    Joined:
    May 31, 2016
    Messages:
    5,115
    Likes Received:
    0
    [​IMG]

    Pioneer4you iPV V200 200W Dual 18650 Box Mod is made of zinc alloy, anodized aluminum, and ABS, which is strong and durable.

    Pioneer4You iPV V200 Mod uses dual 18650 batteries (not included) and the maximum output power is 200W.

    The iPV V200 BOX Mod is powered by the waterproof YIHI SX531 chip. This makes the Pioneer4you iPV V200 Mod not only has a fast-charging function but also has a certain waterproof effect, which provides protection for your safe use. Using the 0.96 inches TFT screen, you can clearly see the vaping data. Five flavor curves can be customized on the smart device side, namely Soft, Normal, Strong, custom SXi-EQ curves, EQ1-EQ3.

    Features:
    510 threading connection
    Material: Zinc alloy & anodized aluminum & ABS
    Battery: dual 18650 batteries (not included)
    Power: 5~200W
    Resistance range: 0.1~1ohm
    Voltage: 6.4~8.4V
    Charging: Type-C, 5V/ 2A
    Quiescent current: <100uA
    Flavor curve: soft, normal, strong, custom SXi-EQ curves, EQ1-EQ3
    Waterproof YiHi SX531 chip
    Dual 18650 batteries, max 200W output
    0.96 inch TFT screen
    Intelligent on-device customizable flavor curves
    5 digit puff counter
    Interchangeable magnet side battery doors
    5V / 2A fast charging
    30mm 510 connector
    Low battery protection
    Battery over-charge protection
    Time limit ignition protection
    Overheat protection
    Low resistance protection
    Short circuit protection
    Reverse polarity protection

    More details for IPV V200, please check >> https://www.3fvape.com/52805-pioneer4you-ipv-v200.html
     

Share This Page