Lauched! Ohm Vape Bape Pod Mod Kit

Discussion in 'General Vendor Discussion' started by Gina, Nov 4, 2020.

  1. Gina

    Gina Guru

    Joined:
    May 31, 2016
    Messages:
    4,165
    Likes Received:
    0
    Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Mod Kit at present? Today let me introduce you one mod kit named Ohm Vape Bape Pod Mod Kit. Now let’s take a closer look at the mod kit below.

    The Original Ohm Vape Bape Pod Vape Mod Kit is powered by 1 x 18350 / 18650 battery (not included). The pod tank is with bottom refilling and bottom airflow control. The coil is replaceable.

    [​IMG][​IMG]

    Main Features:
    Diameter: 22mm
    Bottom filling
    Bottom airflow adjustable
    Powered by 1 x 18650 / 18350 battery (not included)
    Battery status and indicator lights
    Green: 60%~100% charge (3.85V~4.20V)
    Blue: 21~60% charge (3.55~3.85V)
    Red: 1%~20% charge (3.30~3.55V)
    Protection features:
    Dry burn protection: When pressing the fire button, if the e-juice is low or if the coil becomes too dry during your draw, the device will drop the wattage output.
    Reverse polarity: The Bape pod will not turn on and will not display any lights.
    Short circuit: If it is detected or if the resistance is too high, the light indicator will flash a white light twice in succession. Time out: After firing for 10 seconds, the device will automatically stop and display a cyan light flashes 3 times.

    If you want to get one, you can come here:
    Ohm Vape Bape Pod Mod Kit >>>
     

Share This Page