Digiflavor Z1 SBS 80W Side by Side Box Mod

Discussion in 'General Vendor Discussion' started by Gina, Dec 31, 2020.

  1. Gina

    Gina Guru

    Joined:
    May 31, 2016
    Messages:
    5,115
    Likes Received:
    0
    [​IMG]

    Digiflavor Z1 SBS 80W Side by Side Box Mod is a compact and beautiful Side By Side box mod, which fits perfectly in the hand and is easy to operate. The Digiflavor Z1 SBS Mod is powered by a single 18650 battery (Not included), which is inserted into the battery tube from above and secured with a convenient cover. The output power of Z1 SBS Mod in classic VW mode is up to 80 watts (5~80W), and it can also be used in VV mode or work in Bypass mode, meeting all your vaping demands. Featuring Type-C fast charging, the Digiflavor Z1 SBS mod can support longer vaping. A standard control panel is on the narrow side below the 510 connector, including three buttons and a small display. The back is decorated with an exposed battery tube. The top is equipped with a screwable cover with a key. The mod is an SBS design meaning the tank sits at the side of the battery compartment rather than on top of the mod. This design makes the whole kit more compact but you can be restricted on the size of the atomizer that will fit this mod.

    Features:
    lnput voltage: 3.7V~4.25V
    Output voltage: 1.0V~8.5V
    Fully Charged voltage: 4.15~4.25V
    Charger Specification: 5V / 2A
    Output Power: 5~80W
    Powered by a single 18650 battery (Not included)
    Portable size with artistic design
    5~80W adjustable wattage
    With stabwood or shell ornament
    Type-C fast charging cable
    Maximum Power Output: 80W
    User modes: VW, VV and Bypass
    USB Type C charging
    Powered by Single 18650 Battery (Not Included)
    80W Max Output
    Wattage VW / VV / Bypass Modes
    USB Type-C port
    OLED Screen Side-by-Side, SNS box mod

    [​IMG]

    More details, please check >> https://www.3fvape.com/47841-digiflavor-z1-sbs-80w-box-mod.html
     
    #1 Gina, Dec 31, 2020
    Last edited: Dec 31, 2020

Share This Page