Innokin ENDURA T-22 Complete Vaping System Review

Discussion in 'Hardware Reviews' started by mountainmanvape, Jan 7, 2016.

  1. mountainmanvape

    Nov 3, 2015
    Likes Received:
    This was sent to me to review for you. As always I will give my honest opinion god or bad....So let's go!!!
    This is the older brother of the Endura T-18 Starter kit. It uses the same 1.5 ohm coil as the T-18 with a larger 4.5ml tank, and 2000mah battery. If gives a nice warm and pleasurable vape with great taste. I have never had dry or burnt hits with no gurgling or leaking at all. They put the charging port on the bottom of the front of the device allowing you to charge while standing. With three clicks to turn the device on/off, you have a green light when turning on, and red when turning off. It also tells you battery strength with the changing of the LED from GREEN being fully charged, and RED meaning it needs to be charged. It is a 14W regulated device that gives you hours of great vaping. This like the T-18 is also a top fill design to make life easy and cut down on leaking
    If you know someone wanting to quit smoking, or you yourself would like to quit but just don't know where to start. I would recommend you try this device with your favorite flavor ejuice, and enjoy the rest of your life!
    Below is the specs on this complete vaping system, and a link to where you can buy one for yourself.

    Features and Specs:

    ⦁ Charging: Micro USB DC5V/1A

    ⦁ Maximum output Voltage: 5.5V

    ⦁ Maximum output Current: 3.5A

    ⦁ Maximum output Wattage: 14W

    ⦁ Delrin Drip Tip

    ⦁ 4.5mL E-Liquid Capacity

    ⦁ 100% Organic Cotton Coil

    ⦁ Minimum Resistance: 1.2 Ohm

    ⦁ Prism Airflow Technology

    ⦁ Top Fill Twist Design

    ⦁ 22mm Diameter

    ⦁ Glass and Stainless Steel Tank

    ⦁ 2000 mAh Battery Capacity

    ⦁ Box Mod Style Design

    ⦁ 510 Threaded

    ⦁ Dimensions: 5-3/4" x 7/8" (Tank and Device)
    Just Me and zephyr like this.

Share This Page